Abre APP!

Disfruta de ofertas exclusivas de APP.

Abre APP
ANYCUBIC Photon-S Impresora 3D Dual Z axis Quick Slice 405nm Matrix UV Module SLA Resin Impresora 3d
ANYCUBIC Photon-S Impresora 3D Dual Z axis Quick Slice 405nm Matrix UV Module SLA Resin Impresora 3d
ANYCUBIC Photon-S Impresora 3D Dual Z axis Quick Slice 405nm Matrix UV Module SLA Resin Impresora 3d
ANYCUBIC Photon-S Impresora 3D Dual Z axis Quick Slice 405nm Matrix UV Module SLA Resin Impresora 3d
ANYCUBIC Photon-S Impresora 3D Dual Z axis Quick Slice 405nm Matrix UV Module SLA Resin Impresora 3d
ANYCUBIC Photon-S Impresora 3D Dual Z axis Quick Slice 405nm Matrix UV Module SLA Resin Impresora 3d
1/1
382.62€
469
Ahorra un extra de 0 para el uso de la App
5 Opiniones

ANYCUBIC Photon-S Impresora 3D Dual Z axis Quick Slice 405nm Matrix UV Module SLA Resin Impresora 3d - Blanco Australia

Cupón:

promoción:

Apoyo COD Pago

Almacén y Tarifa

Seleccionar
P-1000:Fecha de despacho: Jun 01 - Jun 06

Opciones de Producto

Seleccionar
Blanco Australia
Visita la tienda

Comentarios (5)

Jean S.
Nov 22,2019
Received very quickly: ordered Saturday 16 and received Friday 22 in good condition. First unpack, then connect the power supply, lift the tray, remove the tank, loosen the screw of the tray and finally using a half A4 sheet to adjust the level. All this is very simple.Have a look at the Anycubic website, go to the Photon-S product page and download the latest software and firmware The Photon Workshop V2.xx is much better than the one provided on the USB stick (V1.0 ), very close to ChiTuBox.To use it at his best, it will absolutely be necessary to update the firmware. Nothing more simple to do ... Just download the package P_V502 and extract the two files xxx.bin on a USB key VIRGO FROM ANY OTHER FILE. Place the key in the Photon, connect the power, menu ' print ', select P_V502.bin and ... print it ... : o)The installation takes little time then the Photon reboot. Now check on the system info page and you notice that the firmware is in V5.0.2 but UI is still 2.4 If you return to the print menu, no more files is show... The trick now, will be to cut the power supply, introduce the original usb key and then go to the 'print' menu to display the print files it contains. Take care: files.photons must be in the root of the key. Now turn off the power, insert the key containing the update files again. Now you can select and print the P_UI_2_6.bin ... OUFTI ... !Finally, everything is up to date and now compatible with print files generate by both Photon Workshop and ChiTuBox.
Ver Más

Descripción

Principales Características

System : ANYCUBIC Photon S

Operation : 2.8 inch color TFT Screen

Software : Photon S workshop

Connectivity : USB memory

Technique : LCD shadow masking

Light source : Matrix UV light (405nm)

XY resolution : 0.047mm

Z axis accuracy : 0.00125mm

Layer thickness : 0.01-0.2mm

Print speed : 20mm/H max

Rated power : 50W

Dimension : 230mm(L)*200mm(W)*400mm(H)

Build volume : 115mm(L)*65mm(W)*165mm(H)

Material : 405nm UV resin

Net weight : 5.9Kg

Especificación

Ver más

Productos Recomendados

Productos Patrocinados

Bono para nuevos miembros: cupón de $ 10
382.62€

ANYCUBIC Photon-S Impresora 3D Dual Z axis Quick Slice 405nm Matrix UV Module SLA Resin Impresora 3d

Color

Se envía desde

Cantidad - +
plazos: elija
loading...
loading...
cancelar
loading...
loading...
loading...

Comentarios

4.8 *****
  • 4
  • 1
  • 0
  • 0
  • 0
  • Todo ( 5 )
  • ( 1 )
  • ( 0 )
Jean S.
Nov 22,2019
Received very quickly: ordered Saturday 16 and received Friday 22 in good condition. First unpack, then connect the power supply, lift the tray, remove the tank, loosen the screw of the tray and finally using a half A4 sheet to adjust the level. All this is very simple.Have a look at the Anycubic website, go to the Photon-S product page and download the latest software and firmware The Photon Workshop V2.xx is much better than the one provided on the USB stick (V1.0 ), very close to ChiTuBox.To use it at his best, it will absolutely be necessary to update the firmware. Nothing more simple to do ... Just download the package P_V502 and extract the two files xxx.bin on a USB key VIRGO FROM ANY OTHER FILE. Place the key in the Photon, connect the power, menu ' print ', select P_V502.bin and ... print it ... : o)The installation takes little time then the Photon reboot. Now check on the system info page and you notice that the firmware is in V5.0.2 but UI is still 2.4 If you return to the print menu, no more files is show... The trick now, will be to cut the power supply, introduce the original usb key and then go to the 'print' menu to display the print files it contains. Take care: files.photons must be in the root of the key. Now turn off the power, insert the key containing the update files again. Now you can select and print the P_UI_2_6.bin ... OUFTI ... !Finally, everything is up to date and now compatible with print files generate by both Photon Workshop and ChiTuBox.
Eduardo Dias
Jan 16,2020
Essa foi minha primeira compra no Gearbest.Estava inseguro pois tinha apenas uma referência.Tudo foi perfeito, desde a compra até a entrega, tudo em 4 dias!!!Achei ótimo!
SY
Nov 26,2019
For the price I've bought the Anycubic Photon-S, I can say I'm satisfied.Printing is not as straightforward as announced, but after all, this is not a professional product.Regarding Greabest, they respected the delivery delay and the printer arrived as expected.
Tiago Brazil
Apr 09,2020
Comprei uma e me surpreendi com a qualidade! Recomendo muito. Quando comprei estava metade do preço de agora, não sei porque subiu tanto. Se baixar o valor ou se fizerem pelo mesmo valor que eu comprei, eu compro outra igual.
WA
Mar 13,2020
Livraison en 6 jours.Imprimante parfaitement emballée et protégée avec son carton renforcé et mousse semi rigide.il faut juste faire une calibration avant de pouvoir l'utiliser.Bonne qualité.
Sin más comentarios
Ver Más
Ver Más